Safety Boots
-
Agricultural
ALBANY BLK (PRODUCT CODE: 7047) – S3 SRC HRO
Read moreThe Albany dealer boot in our premium Samson range is the original safety dealer boot and offers the most robust protection with the premium waxy finished black leather. This premium genuine leather upper completely resistant to water keeps one’s feed dry, however the elasticated side gussets allow breathability and comfort. Using the finest stainless steel for the toe cap offers the strongest protection, while the Kevlar midsole allows for puncture resistance, yet allows flexibility. Slide on or pull off this quality boot with genuine leather inner lining and durable leather pull tab on the rear.
- GENUINE BLACK NUBUCK LEATHER
- WATER RESISTANT
- 200 JOULE TOE CAP
- REINFORCED KEVLAR MIDSOLE
- RESISTANT TO ACIDS & CHEMICALS
- SLIP RESISTANT SRC OUTSOLE
- HEAT RESISTANT RUBBER SOLE 300°C
- NITRILE RUBBER OUTSOLE
- ANTI-FATIGUE PU FOOTBED
-
Safety Boots
PRODUCT CODE: 9158 – S3 SRC
Read more1. GENERAL
1.1 Black leather safety uniform boot with composite midsole non metal toe cap protection S3 SRC
1.2 Dual density polyurethane sole and heel.
1.3 The whole is constructed to comply with the requirements of EN ISO 20345- S3.
1.4 Slip Resistance SRC
2. DETAIL
2.1 Upper
Black smooth haircell water resistant leather upper.
2.2 Vamp Lining and Quarter Lining
Cambrelle equivalent fabric lining.
2.3 Insole
Stroble lasted non woven insole.
2.4 Composite Toe Cap
200 Joules,
2.5 Sole and Heel
Dual density polyurethane injection moulded. Antistatic, Oil, petrol, acid alkali and heat resistant to 130ºC
2.6 Footbed
Comfort EVA footbed with raised instep support.
Available in sizes 4-13
-
Essential Safety
DRAX (Product Code 9069) EN ISO 20345:2022
Read moreThe TK Essentials Drax is a metal-free safety boot-trainer hybrid with a genuine suede upper, composite toe cap, and slip-resistant sole – offering lightweight protection with all-day comfort.
-
Essential Safety
EDGE (Product Code 2138) EN ISO 20345: 2022
Read moreThe TK Essentials Edge is a durable, metal-free safety boot with a tough leather upper, composite toe cap, and slip-resistant sole – ideal for environments where metal-free protection is essential.
-
Essential Safety
BLAZER (PRODUCT CODE: 4213) – S5 SRC
Read moreThe Tuffking Blazer is an all purpose safety wellington with no frills and straight to business. Offering full PVC upper which is soft and flexible even at low temperatures. The anatomic design for higher leg and foot comfort helps keep feet dry in extreme wet environments. The outsole offers resistance to acids, fertilizers, chemicals and offers a deep cleated design specifically for slip resistance. The polyester lined inner is easy to clean and can be washed for repeated use and is Anti-Bacterial.
- PVC & NITRILE UPPER
- ANTIBACTERIAL POLYESTER LINING
- 200 JOULE TOE CAP
- REINFORCED STEEL MIDSOLE
- RESISTANT TO ACIDS & CHEMICALS
- SLIP RESISTANT OUTSOLE
- WATERPROOF
- ANTI-STATIC SOLE
- DEEP CLEATED GRIP DESIGN
-
Essential Safety
DELTA (PRODUCT CODE: 9038) – S1P SRC
Read moreDELTA : Black safety chukka boot with water resistant buffalo leather upper. Deep padded and stitched collar for comfort around ankle for movement on work sites. Triple stitching offers increased durability that is rarely found on entry level safety footwear. Dual density polyurethane anti-static outsole offers increased impact resistance and wearability. The quality stitching will help the boots last longer and prevent wear and tear on the of the boot that encounters the most debris. Stainless steel toe cap and midsole will not corrode in wet conditions and offer the strongest safety possible. The outsole is tested and certified for SRC slip resistance on ceramic and steel surfaces for the highest slip resistance certification. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
- BLACK BUFFALO LEATHER
- WATER RESISTANT
- PENETRATION RESISTANT
- PROTECTIVE TOE CAP
- 4 D-RING LACING
- STAINLESS STEEL TOE CAP
- STAINLESS STEEL MIDSOLE
- SLIP RESISTANT SRC TESTED
- PU/PU OUTSOLE
-
Essential Safety
AUSTIN (PRODUCT CODE: 9001) – S1P SRC
Read more- BLACK BUFFALO LEATHER
- WATER RESISTANT
- PENETRATION RESISTANT
- PROTECTIVE TOE CAP
- 3 EYELET LACING
- STAINLESS STEEL TOE CAP
- STAINLESS STEEL MIDSOLE
- SLIP RESISTANT SRC TESTED
- PU/PU OUTSOLE
-
Essential Safety
DELTA+ (PRODUCT CODE: 9040) – S1P SRC
Read moreDELTA +: Black safety chukka boot with water resistant buffalo leather upper. Deep padded and stitched collar for comfort around ankle for movement on work sites. Triple stitching offers increased durability that is rarely found on entry level safety footwear. Dual density polyurethane anti-static outsole offers increased impact resistance and wearability. The front scuff guard over the toe cap will help the boots last longer and prevent wear and tear on the front of the boot that encounters the most debris. Stainless steel toe cap and midsole will not corrode in wet conditions and offer the strongest safety possible. The outsole is tested and certified for SRC slip resistance on ceramic and steel surfaces for the highest slip resistance certification. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
- BLACK BUFFALO LEATHER
- WATER RESISTANT
- PENETRATION RESISTANT
- PROTECTIVE TOE CAP
- FRONT SCUFF GUARD
- STAINLESS STEEL TOE CAP
- STAINLESS STEEL MIDSOLE
- SLIP RESISTANT SRC TESTED
- PU/PU OUTSOLE
-
Essential Safety
TRITON (PRODUCT CODE: 4217) – S5 FO SR
Read moreErgonomically shaped outsole built for tough industrial environments. Extra thick tread on the outsole helps to increase the impact absorption and protect from the elements. Built in ankle guard protects from unexpected hazards on job sites. Front scuff guard helps the longevity of the boot making ease of kneeling. Made from highly durable injected PVC resistant to acids, manure and fertilisers and anatomically designed for high leg protection. The sole is also of PVC and is blended and injected using the newest techniques to ensure a rough and tough boot ready for harsh conditions. The deep cleated sole offers a higher grip on wet and greasy surfaces. The heel offers impact absorption for heavy shocks and is also fully slip resistant SRC. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
-
Safety Boots
FREMONT(PRODUCT CODE: 9556) – S1P
Read more1.1 Black 4 d-ring buffalo leather chukka boot with steel toe cap and steel midsole to EN ISO 20345
1.2 Dual density polyurethane anti static sole.
1.3 Constructed to comply with the requirements of EN ISO 20345
2. DETAIL
2.1 Upper
Black buffalo printed leather with water resistant , Deep padded and stitched collar with full padded tongue.
2.2 Steel Toe Cap
200 Joules to EN ISO 20344
2.3 Sole and Heel
Injected dual density polyurethane To EN ISO 20345. Oil, acid, alkali and heat resistant to 130’C
2.5 Steel Midsole
Penetration resistant stainless steel to EN ISO 20345
3. PERFORMANCE REQUIREMENTS
3.1 Impact Resistance
When the footwear is subjected to the 200 Joules impact test as specified in EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 6 of EN ISO 20344. (14mm for size 8.)
3.2 Compression Resistance
When the footwear is tested in accordance with EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 6 of EN ISO 20344. (14mm for size 8 when subjected to 15,000 N.)
3.3 Penetration Resistant Midsole
When footwear is tested in accordance with the method described in clause 6.2 EN ISO 20344, the force required to penetrate the sole unit shall not be less than 1100N.
3.4 Slip Resistance
The footwear is tested to EN ISO 20344:2011 for slip Resistance.
The footwear is tested on Ceramic tiles and Steel surface as specified
in ISO13827. The footwear specified is to SRC slip resistance.
Available in sizes 3-13
