Shop
-
Safety Boots
VERANO (PRODUCT CODE: 7003) – S3 WR HI CI SRC HRO
Read moreHardwearing waterproof safety boot, the Tuffking Verano is perfect for any industrial setting. This sleek light weight boot performs under the harshest conditions and will keep your feet insulated in the dead of winter and cool in the summer heat with our specialized TUFF-DRY breathable waterproof lining. Using our Xtra-Lite footbed system, this triple layered military grade memory foam offers comfort for rigorous hours spent on foot. Midsole constructed of composite Kevlar material and toecap of the lightest weight Fibreglass. The cushioned and energy absorbing dual density PU/Rubber sole creates an added layer of comfort for long wear. Made from the finest quality water resistant genuine leather upper, this waterproof boot will keep your feet dry in the wettest and most dire conditions. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
- FULL GRAIN WATER RESISTANT LEATHER
- WATERPROOF MEMBRANE
- FIBREGLASS TOE CAP
- COMPOSITE MIDSOLE
- TPU SIDE ANKLE SUPPORT
- OIL, ACID & CHEMICAL RESISTANT
- HEAT RESISTANT RUBBER SOLE 300°C
- HOT AND COLD INSULATED
- DUAL LAYERED EVA FOOTBED
-
Emergency Services
VERTEX (PRODUCT CODE: 7010) – S3 WR HI CI SRC HRO
Read moreThis sleek light weight boot performs under the harshest conditions and will keep your feet insulated in the dead of winter and cool in the summer heat with our specialized TUFF-DRY breathable waterproof lining. Using our Xtra-Lite footbed system, this triple layered military grade memory foam offers comfort for rigorous hours spent on foot. Comprised of completely METAL-FREE material, this boot offers fibreglass toecap with Kevlar midsole for the lightest weight protection. The cushioned and energy absorbing dual density PU/Rubber sole creates an added layer of comfort for long wear. Made from the finest quality water resistant genuine leather upper, this waterproof boot will keep your feet dry in the wettest and most dire conditions. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
- 2.0mm FULL GRAIN LEATHER
- CHEMICAL RESISTANT
- WATERPROOF MEMBRANE
- COLD INSULATED TO -20°C
- FIBREGLASS TOECAP
- KEVLAR MIDSOLE
- FLAME RETARDENT LEATHER
- PU ANTI-FATIGUE FOOTBED
- HEAT RESISTANT RUBBER SOLE 300°C
-
Emergency Services
VERTEX (PRODUCT CODE: 7011) – S3 WR HI CI SRC HRO
Read moreThis sleek light weight boot performs under the harshest conditions and will keep your feet insulated in the dead of winter and cool in the summer heat with our specialized TUFF-DRY breathable waterproof lining. Using our Xtra-Lite footbed system, this triple layered military grade memory foam offers comfort for rigorous hours spent on foot. Comprised of completely METAL-FREE material, this boot offers fibreglass toecap with Kevlar midsole for the lightest weight protection. The cushioned and energy absorbing dual density PU/Rubber sole creates an added layer of comfort for long wear. Made from the finest quality water resistant genuine leather upper, this waterproof boot will keep your feet dry in the wettest and most dire conditions. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
- 2.0mm FULL GRAIN LEATHER
- CHEMICAL RESISTANT
- WATERPROOF MEMBRANE
- COLD INSULATED TO -20°C
- FIBREGLASS TOECAP
- KEVLAR MIDSOLE
- FLAME RETARDENT LEATHER
- PU ANTI-FATIGUE FOOTBED
- HEAT RESISTANT RUBBER SOLE 300°C
-
Safety Boots
VIKING (PRODUCT CODE: 2125) – S3 WR SRC HRO
Read moreA truly tough 6” waterproof safety hiker that is an all around best, the Tuffking Viking is a warrior of a boot. Built with every feature needed to tackle any hazardous work site, the Viking is the perfect industrial boot. Perfect for construction with the durable crazy horse black leather and raised side padding combined with front tpu scuff guard. Extra padding along the tongue and collar offers excellent ankle support. The Xtra-Lite® PU Anti-Fatigue Footbed makes long days a breeze and helps protects joints from hard days on the job.
- CRAZY HORSE LEATHER
- WATERPROOF MEMBRANE
- THINSULATE INNER LINING
- STAINLESS STEEL TOE & MIDSOLE
- HEAT RESISTANT RUBBER SOLE 300°C
- OIL, ACID & CHEMICAL RESISTANT
- DUAL DENSITY PU/RUBBER OUTSOLE
- DEEP PROTECTIVE EXTERNAL PADDING
- PU ANTI-FATIGUE FOOTBED
-
Air Cushion Safety
YATE (PRODUCT CODE: 5222) – SB E SRA
Read moreYATE Air Cushion safety shoe from the SAMSON Professional range of products. This is among the most comfortable shoes in the range with a specialized Air Cushion sole to reduce impact when on feet for long hours. The genuine cowhide leather upper offers a padded top cuff for ankle comfort. Using only the best quality 2.0mm leather thickness far more than the average allows for increased durability and wear life. Available in a Ladies Version and also available in half sizes and wide fitting to accommodate all foot shapes. All of our Samson range is manufactured in an Environmentally Sustainable Factory equipped with solar panel roofing, energy efficient machinery and using recycled packaging materials. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
GENERAL
1.1 Three eyelet Gibson uniform shoe, black fine haircell cowhide leather upper with padded top line . Style 5222 standard fitting. Style 5223 wide fitting. Style 5224 ladies fitting.
1.2 PVC direct cemented sole and heel.
1.3 The whole is constructed to comply with the requirements of EN ISO 20345.
2. DETAIL
2.1 Upper Black full grain leather, 1.8mm/2.0mm substance.
2.2 Vamp Lining and Quarter Lining Leather.
2.3 Insole 2.75mm/3.00mm ‘Texon 480’ cellulose board, or 3.0mm ‘Redoma’.
2.4 Steel Toe Cap 200 Joules, to EN ISO 20345. 2
2.5 Sole and Heel Deep cleated translucent PVC direct cemented to the leather upper. Oil, petrol, acid and alkali resistant. Deep cleats.
2.6 Footbed Full leather footbed with raised instep support.
2.7 Sizes 5222 – sizes 4-15, Half sizes 4½-12½. (size 14 /15 extra large sizes have a 25% surcharge) 5223 wide fit ,sizes 4-13, Half sizes 4½-12½. 5224 Ladies style – sizes 3-8 full sizes only.
3. PERFORMANCE REQUIREMENTS
3.1 Impact Resistance When the footwear is subjected to the 200 Joules impact test as specified in EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8.)
3.2 Crush Resistance When the footwear is tested in accordance with EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8 when subjected to 15,000 N.) 3.3 Slip Resistance When tested in accordance with the requirements of EN 13287:2004, on ceramic tiles coated with NaLS, the coefficient of friction shall not be less than 0.28 for the heel and 0.32 when flat.
Available in sizes 4-13 Half sizes available
-
Air Cushion Safety
YATE WIDE FIT(PRODUCT CODE: 5223) – SB E SRA
Read moreYATE Air Cushion safety shoe from the SAMSON Professional range of products. This is among the most comfortable shoes in the range with a specialized Air Cushion sole to reduce impact when on feet for long hours. The genuine cowhide leather upper offers a padded top cuff for ankle comfort. Using only the best quality 2.0mm leather thickness far more than the average allows for increased durability and wear life. Available in a Ladies Version and also available in half sizes and wide fitting to accommodate all foot shapes. All of our Samson range is manufactured in an Environmentally Sustainable Factory equipped with solar panel roofing, energy efficient machinery and using recycled packaging materials. Manufactured in accordance with ISO 9001 Quality Management and ISO 14001 Environmental Management systems.
GENERAL
1.1 Three eyelet Gibson uniform shoe, black fine haircell cowhide leather upper with padded top line . Style 5222 standard fitting. Style 5223 wide fitting. Style 5224 ladies fitting.
1.2 PVC direct cemented sole and heel.
1.3 The whole is constructed to comply with the requirements of EN ISO 20345.
2. DETAIL
2.1 Upper Black full grain leather, 1.8mm/2.0mm substance.
2.2 Vamp Lining and Quarter Lining Leather.
2.3 Insole 2.75mm/3.00mm ‘Texon 480’ cellulose board, or 3.0mm ‘Redoma’.
2.4 Steel Toe Cap 200 Joules, to EN ISO 20345. 2
2.5 Sole and Heel Deep cleated translucent PVC direct cemented to the leather upper. Oil, petrol, acid and alkali resistant. Deep cleats.
2.6 Footbed Full leather footbed with raised instep support.
2.7 Sizes 5222 – sizes 4-15, Half sizes 4½-12½. (size 14 /15 extra large sizes have a 25% surcharge) 5223 wide fit ,sizes 4-13, Half sizes 4½-12½. 5224 Ladies style – sizes 3-8 full sizes only.
3. PERFORMANCE REQUIREMENTS
3.1 Impact Resistance When the footwear is subjected to the 200 Joules impact test as specified in EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8.)
3.2 Crush Resistance When the footwear is tested in accordance with EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8 when subjected to 15,000 N.) 3.3 Slip Resistance When tested in accordance with the requirements of EN 13287:2004, on ceramic tiles coated with NaLS, the coefficient of friction shall not be less than 0.28 for the heel and 0.32 when flat.
Available in sizes 4-13 Half sizes available
-
Industrial &
YUKON (PRODUCT CODE: 7057) – S3 FO SC SR WPA
Read moreIntroducing the new Tuffking Yukon rigger boot, made using genuine crazy horse brown safety rigger boot. Extra padded ankle support and TPU rear kick guard for increased durability. Offering supreme toe cap protection along with corrosion resistant midsole. The premium leather makes this the perfect rigger boot for kicking on and off in any industrial environment. The ergonomic outsole makes this more comfortable than traditional rigid rigger boots. The Tuffking Yukon is the perfect all purpose rigger boot, whether being worn for heavy industrial or mixed uses this boot is built strong for durability.
- FULL GRAIN BROWN WAXY LEATHER
- BUILT IN PADDED ANIKLE SUPPORT
- REAR PADDED COLLAR FLEX
- DUAL PULL TABS
- IMPACT ABSORBING OUTSOLE
- LADDER GRIP HEEL SUPPORT
- CAMBRELLE ABSORBENT LINING
- SCUFF GUARD PROTECTION
- TPU REAR KICK GUARD
- LIGHTWEIGHT ERGONOMIC DESIGN
- TOE CAP & MIDSOLE PROTECTION
- RESISTANT TO OILS, ACIDS & CHEMICALS
- NEW SLIP RESISTANT “SR” TESTED
- ANTI-FATIGUE CUSHIONED FOOTBED
